How To Make A Jumbo Jenga Set

Acquire how to build a Giant Jenga Game. This Giant Jenga game is the perfect yard game and we congenital this for my younger brother, Sam, and sister-in-constabulary's, Lindsay, wedding.

This Giant Jenga Game is an easy DIY project that you can accomplish in but a couple hours and tin can be built out of recycled ii″x4″ boards or a few new 2″x4″ boards.

In this tutorial you volition acquire how to make a DIY Giant Jenga Game that is surely fun to play. Be sure to spotter the video (in a higher place), as it shows a lot more than of the how-to steps and details of this project.

Supply and Tool List for Giant Jenga Game

three/4″ plywood xviii″x18″
6 – 2″x4″ x 8′ pine boards to make 54, 10 1/2″ pieces
1 – 2″x" ten 6′ pine board to make the sides for xviii″x18″ plywood base
Cost: The 2x4s cost under $19 and plywood slice would be around $2

Sandpaper (120 to 180 grit)
Cost: $4 worth of sandpaper for this project

Threaded Feet for base of operations
Cost: About $3 for a pack of four from local hardware store

15 Kreg Screws
Cost: Smallest box you lot can buy is 100-count for around $4

Tools:

Dewalt Orbital Sander: http://amzn.to/2FxsdbV
Ryobi Drill Kit
Dewalt 12" Miter Saw: http://amzn.to/2ESRcZX

Dewalt Round Saw: http://amzn.to/2CKWEbE

Kreg Jig

Tape Mensurate, Pencil, Ear Protection, Heart Protection

Step 1: Build the Giant Jenga Game Platform

Cutting the iii/4″ plywood to 18″x18″ using a round saw or fifty-fifty a table saw. Then make a frame out of ii″x4″ boards. Cutting ii boards to fifteen″ and two boards to 18″ using a round or miter saw. Then, using a Kreg Jig and Kreg Screws, we attach the two″x4″ cutting boards to the plywood and to each other to form the base for the platform.

We then screwed holes and attached the threaded self-leveling feet on the platform.

Step 2: Gather 2x4s and Cutting out the 54 Jenga Pieces

With the ii″x4″ boards, nosotros cut 54 Jenga pieces at x one/2″ each. I'd recommend setting up a 'stop' on your miter saw to brand the procedure go much quicker.

Step iii: Sand the Jenga Pieces

Using either an orbital saw or a benchtop belt sander, we sand each piece smooth on the ends and the sides. Nosotros had a pretty good assembly line going between me cutting the pieces and passing downwardly the line to my brother and his fiance who were sanding.

Step four: Stack the Jenga Pieces up

Place your constructed plywood and 2″x4″ platform on the ground and stack up the 2″x4″ Jenga pieces in rows of 3, alternating the direction of stacking every layer.

Step five: Play Jenga!

This is a great, fun project to make with a friend or family members. This Giant Jenga Game is a hit at wedding receptions, family unit reunions, bbq's, or any other get together. See how long you can play until it all falls downward! Accept fun and build a DIY Giant Jenga Game!

How To Make A Jumbo Jenga Set,

Source: https://www.diypete.com/how-to-make-a-diy-giant-jenga-game/

Posted by: wanniong1966.blogspot.com

Share this post